Yellow Bullet Forums banner
1 - 20 of 32 Posts

· Registered
Joined
·
1,861 Posts
Weather is great down here. I'm over looking my pool at work & already have beer in the fridge.

And hows the weather in lovely Maryland?

I would ask when will you be joining the Mobley gang at the track again. But the real question should be, when will they be at the track for you to join them? lol
~Kel
I was at the track last night with my two kids in the double stoller !!! The weather is sunny and hot as hell !! I'm getting the lotion on the kids now for a swimming lesson..... I teach them by throwing them off the diving board and saying good luck :rolleyes::rolleyes:
 

· Registered
Joined
·
1,861 Posts
Must be in OEM produced location. May be notched for bell housing, distributor, blower and exhaust. Smoothing of firewall allowed. Must consist of sheet metal (steel). Firewall may not be completely replaced with sheet metal. In cases of fiberglass or SMC firewall sheet metal must cover entire firewall. Where is the firewall not covered ?????
 

· Registered
Joined
·
1,861 Posts
The car is 100% legal for 10.5 outlaw...It's has won orlando,shakedown,outlaw @ atco , multible orsca races and it's not legal??? The firewall is about 70% original.The car will be at adrl next weekend at MIR if any of you none believers want to check out the FIREWALL ....BUNCH OF CRY BABIES !!!!!!!!!
 

· Registered
Joined
·
1,861 Posts
i think lynch/petty will still show them whos boss.they havnt let all the tricks out of the bag yet.just wait till petty turns that bitch loose.
steve and tim are making big power but that screw blowing makes about 200-300 more horsepower ...
 

· Registered
Joined
·
1,861 Posts
That engine is.
Where have you been 10.5 outlaw has been running larger motors than promods for years. Thats why it's called outlaw [ outlaw bill ] If you knew anything about promod they don't have motors like mobley with a screw and small pully !!! Mobley's makes alot more power !!!
 

· Registered
Joined
·
1,861 Posts
i will admit that the car really does look badass but to say that mobley and chuck are gonna show petty and lynch a thing or two is pretty ignorant... they've had this car down the track a couple of times, and this isn't your run of the mill outlaw motor and they don't have all that much data to go off of so we should just wait to make any comments about him taking over the outlaw world... screw blower and 10.5 tires is a tough combination to make work, but i'm sure if anyone is gonna be able to do something like that it will be mobley and chuck...
who said chuck & gil will show tim & steve a thing or two ????
 

· Registered
Joined
·
1,861 Posts
Where have you been?....Nope don't think so, other than the turbo stuff and some of the huge juice motors that have been "in" lately most of the motors P/M use have trickled down to 10.5
If "you knew" anything about P/M you'd know plenty of P/M cars have motors likely mobley has long ago just not in the HRA's. Thats why it's called OUTLAW :finga:
Nitrous promod could only run 740ci when outlaw cars where running 762ci.Now p/m can run 5 in 820ci or 800 ci 5.2 space. some outlaw cars have 870ci 5.2 in them.Tell me who runs a 870ci in promod ??????
 

· Registered
Joined
·
1,861 Posts
Read post #1 on this thread.
I know i can read but i cant find it .You must be a democrat if you read it ....all i can say is that this is one of the baddest cars ive seen in my 22 years of being around drag racing. the power of this thing is unreal! on a track with not the best conditions and breaking parts it still goes 4.71 and broke just after the 330.Tim Lynch you know your a friend of mine but you boys are gonna have your hands full when this things right.and no iam not hugging gils nuts or bashing tim just getting some good times going between all of us.
 
1 - 20 of 32 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top