Anyone ever fit a 29.5x10.5 tire in a stock wheel tub on a G.body?? It has had a full frame notch and both inner and outer wheel lips were rolled..It is a 29.5x10.5 w.tire mounted on a 10"wheel w.4.50" backspace..
Age finally caught up with my old mild steel headers and exhaust system, so I decided to do it right, hopefully for the last time.
Old system was 2.00 into 3.50 collector, dropping down to 3.00 exhaust after the cutout valves, 3.00 back to the fender dumps. Went 9.86/135.91, 1.40, 3880lbs, 93...
I have a 434 small block that I am thinking of changing to an 18 degree motor for street and strip.
The specs are following
Dart 18 degree race series heads 272cc
Flowing 382 cfm @.700 intake
261cfm. @ .700 exhaust
Edelbrock glidden 2859
Pro systems 1100...
Hey all, I have a 406 sbc and currently have the following:
Little m block
Brodix track one heads ported as much as they can be
1 7/8 open headers
Weighs 2750 with me in it (I have room to shave some weight and plan to do so)
Drag race only, no street...
My goal is to build a competitive street strip car that can race 8.50 idex maybe low 8s high 7s maxed out. The car is a 65 ford falcon it’s a fairly light vehicle When everything is said and done I don’t expect it to weight much, probably around 3000 pounds heaviest. The engine setup would be a...
Thanks for the ad to the group.
I have a few projects. My Sons 74 Apollo me and my son work on. It's been converted to almost a 68 to 74 nova restomod. Got a 74 Nova front clip, 68 front bumper and trim and grill... It's getting my old 75 vette motor after we rebuild to a 355. It has those...