Yellow Bullet Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
5,340 Posts
Usually, you'd run tubing horizontal all the way around, on the same plain, keep your helmet in. If you add another vertical bar, it will probably look kind of funny. I think spec only calls for 3/4" x .049 for the bars that contain the helmet, but you could use anything bigger than that if youd like.
Good luck!
Kyle
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top