Yellow Bullet Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
4,846 Posts
Discussion Starter · #1 ·
any of you guys running russell twist lock hose or equivalant on your race cars from fuel cell to carbs ?? .....also what about aluminum fuel lines ??
 

·
El Diablo Blanco
Joined
·
6,780 Posts
I've used the twist lock before and not had any problems with it. Did the aluminum line from a fuel cell back in like '95-96 and it worked ok.
 

·
Registered
Joined
·
886 Posts
I thought about aluminum lines on my car. The stuff from Earls is too thin walled for EFI. I'd like to find some thicker walled 1/2in line for my car. Need to upgrade from what I have now.

I've been running the Aeroquip push lock for 6 years on my car. It's starting to crack on the outside and may be weeping fumes too!!
 

·
Registered
Joined
·
5,962 Posts
I've been using aluminum fuel line for 30 years with no problems, you have to mount it right on the car and use proper fittings.
I've never used it with any EFI system however.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top