Yellow Bullet Forums banner
1 - 5 of 5 Posts

· Registered
9 Posts
Discussion Starter · #1 ·
Ive got a 408SBF with a Carb shop 850,AFR205s,super vic,and a 540 lift roller cam.Im running a NX genini plate setup and wanted to know what you guys suggest on fuel pressure?Im at 8psi on carb and 10psi on Nitrous fuel side.Book says its a 175 shot.Thanks guys.
I was running a blower with this same setup.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.