Yellow Bullet Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
2,604 Posts
Discussion Starter · #1 ·
with a single fogger setup flowing it through a 73 jet.is a mounted gauge really needed for the nos fuel preasure.or is it ok just to flow it through the flow gauge close close it up and figure its gonna stay where its supposed to be.running a magna flow 500 pump to the single carb and 1 fogger.the regultor to the carb has a fuel preasure gauge so if somthing happens and fuel pressure drops i would see it on the carbed fuel preasure gauge the regulators are mounted on a magna flow fuel log.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top