[pawnman69z]

i have a 69 camaro (go figure) with a tall deck bbc and a stock front sub frame...i would like to have a set of fender exit headers built for my car...anyone have any pictures or tips on how to build a set...im looking for some ideas on the tube routing and position...i also would like some kind of short muffler that would work with this combo...thanks in advance...

chris

 

[seracecars]

You have to get pretty creative to get all that in there...but it can be done. Be prepared to spend some time fitting it all together. I usually start with a header kit and several J bends. Outline a J bend on a few pieces of cardboard and cut them out. I'll cut a big Flowmaster style shorty bullet muffler in half and tack weld it on to a shortened collector and mock it in place. All you have to do then is just fab the tubes from the flange to the collector. Sounds easy huh? Flow all the tubes together smoothly, clamp it all down, tig it all up and Voila'. Do this a few dozen times and you're header builder. Or you can call one of us up and we'll do it for you.

Steve

 

[chassisguy]

http://www.magnaflow.com/02product/02race.asp

 

[Bigtime]

here is what i have been using:

http://www.verociousmotorsports.com...mance-5-Long-304-Stainless-Steel-Race-Muffler

 

[Crossbar]

If you dont mind spending some cake these are really nice.

http://www.burnsstainless.com/UltraliteMuffler/ultralitemuffler.html

 

[pawnman69z]

thanks for everyones input...

chris