Yellow Bullet Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
632 Posts
Discussion Starter #1
Hey guys whats everyone doing when you remove your
factory steering wheel with the air bag? :confused:
searched on line and found some adapters from MOMO..
any advise and pics would help greatly ..
thanks in advance to all my fellow ford racers.
and yellow bullet race junkies:smt100:smt100:smt100:smt100:smt100
 

·
Registered
Joined
·
154 Posts
Mark Williams quick release hub welded on and a grant wheel. Made a cover out of abs plastic and covered it with carbon fiber vinyl.




 

·
Registered
Joined
·
9,494 Posts
I been thinking this in my notch, thanks for the thread and good information so far.
 

·
Registered
Joined
·
632 Posts
Discussion Starter #8
thanks chris93 BTW very nice car and int
will give that a shot
 

·
Registered
Joined
·
632 Posts
Discussion Starter #9
:pI just used a grant adapter from a foxbody with no airbag on my 1993 ,

grant part # 3289[/QUOTE]


Thanks half pint for the grant ##
 

·
Registered
Joined
·
5,565 Posts
I got an airbag delete from Jim Summers years ago. Removed the airbag, and this fiberglass blank fits in its' place.
 

·
Registered
Joined
·
998 Posts
i have a tilt wheel in my 87 and i want to swap it w/ a non tilt. the non tilt columns are shorter because the air bag wheel is bigger then the non air bag wheels, i want to put a quick release hub on mine and i dont want my steering wheel sticking out too far, im in md and im near mason dixon if your selling your non tilt column skipnay
 
1 - 11 of 11 Posts
Top