[ILVSMOG]

Does anybody have any experience with non NOS brand fogger nozzles? I'm putting a system together but the nozzles for it disappeared. Before I go out and blindly buy another set of NOS nozzles, I thought I'd ask around some. The application will be low fuel pressure (5-6psi) and between 200-300HP on a conventional head BBC.

Thanks!!

 

[OB1]

I like the Nitrous Supply Nozzles.

 

[gimmemud]

Are you needing 90* or Annular?

 

[ILVSMOG]

The manifold this is going on hasn't been drilled yet, so I could go either way. I've only used annular once in the past and had good results, but I had to send the manifold out to get the bungs put on it.

 

[OB1]

The manifold this is going on hasn't been drilled yet, so I could go either way. I've only used annular once in the past and had good results, but I had to send the manifold out to get the bungs put on it.

The annular nozzles tend to atomize the fuel more efficiently....so, if you can, I would go that rout. Then you can go with the Edelbrock E3 nozzle or the new Nitrous Supply nozzle P/N 23700r

 

[Shelton_Barrs]

I like the E3s I have on mine.

 

[Shum]

I just got a set of the NOS annular nozzles and I'm very satisfied with them.

 

[gimmemud]

Either the NOS annular or the Edelbrock E3 will be fine, I am sure Steve @IS can give you a good deal on the E3's or Monte Smith can hook you up on the NOS Annular.

 

[ILVSMOG]

Looks like the annulars are getting a lot of love. I'm probably going to need suggestions for someone to install the bungs in the manifold too, it looks like.

 

[oldman1946]

Give Steve at Induction Solutions a call. They now have their own annular nozzle. They also have their own kits.

 

[TroyJR]

Steves new IS nozzles are some nice pieces just used two sets on a manifold.

 

[Induction-Solutions]

Yes, we do have our own new annular nozzles. We can put some of our CNC made bungs in your manifold if you need as well..

I myself prefer the annulars over the 90's too.. Thanks, Steve

 

[Greg2]

Let's see pics Steve! Slacker. LoL

 

[ILVSMOG]

I'd love to see some pics too! I was going to try to go the cheap-nozzle route and do the manifold myself, but I know I'll be a lot happier in the long-run just having someone who knows better than I, WTF they're doing just build the system for me. It'll be right that way and I hopefully won't have any setup or tuning issues caused by my own cheap-ass or goofy mistakes.

 

[Induction-Solutions]

We'll be launching quite a few new things on our web site ( www.Induction-Solutions.com ) soon !!! Please keep your eyes on our site and you might be the first to see !! Thanks, Steve