Yellow Bullet Forums banner
1 - 2 of 2 Posts

·
Administrator
Joined
·
137,258 Posts
I have always used NOS brand fogger and plate systems. I have never had a problem with them and they are the easiest to get parts for. I would really think about getting the Pro Shot Fogger to be able to reuse the same system on another motor or on this motor if you ever wanted more than 250 HP of nitrous. It would also be a lot easier to sell if ever needed...
 

·
Administrator
Joined
·
137,258 Posts
A fogger is a better bet.. You can tune each cylinder without having to worry about distribution problems. Here is a PFD file from NOS with the system on it.

http://www.holley.com/Catalogs/NOS2004/NOS layouts.pdf

I personally think a fogger is the only way to fly. Nitrous is tricky enough to tune let alone fighting distribution problems with the manifold. If you are only planning on running small amounts of nitrous (100-200 HP) than a plate wont be that bad of a deal. But if you are looking for more, I would recommend a fogger... JMO
 
1 - 2 of 2 Posts
Top