Yellow Bullet Forums banner

Fast XFI internal datalogger issue

895 Views 1 Reply 2 Participants Last post by  Greg Kelley
Does the XFI need a switch input trigger to start the internal datalogger? Is it a LS or HS input?

We setup the parameters in the XFI for the logger to start but it still wont begin logging... We werent sure if it needed a trigger.
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.