Yellow Bullet Forums banner
1 - 1 of 1 Posts

·
T/S 368E
Joined
·
37,913 Posts
.

I had an interference issue when I 1st got an electric shifter. I ran the relay off my 7-3 box.
The engine started running ragged, & the shifter was inconsistent. Also had crank trigger. I ended up buying window switch,
put filter on the power in, so the ignition could not have any effect. Engine ran normal, & shifter shifted exact every time.
Your's sound more like a back feed or wrong circuit since it's consistently shifting at the same spot. Good luck.

.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top