Yellow Bullet Forums banner

1 - 9 of 9 Posts

·
Let the Clutch Out
Joined
·
17,708 Posts
Discussion Starter #1
A friend of mine has a Set of 063 Oval port Closed Chamber BBC heads, he would like to have them Cleaned and tanked , Angle milled, 2.19/ 2.25 1.88's installed and have the Valves unshrouded . And the Chambers cleaned up , and a Competition valve job. Problem is he can't find no one local that has done it before or thinks it worth their time . He has a Flat topped .030 over 454 and wants to put in a Solid Lift Cam and make around 550 HP 500 Torque. The car its going in weighs 3830 with driver Th400 , 4800 PTC 8" convertor, 4.56 Gear, 30 in tall Tires .


So where is close to the Dragstrip say with in 50-75 miles that he could go and get a Good , reliable job out of someone?

BTW thanks in advance
:cool:
 

·
Registered
Joined
·
165 Posts
Give Henry Boyko a call, 586-242-8778. He still does cast iron at a good price. I think he is out of Waterford.
 

·
Registered
Joined
·
1,310 Posts
Whats his Budget ? Besides his castings, what else dose he have ? You can reply here or send me a P.M.

Ron
 
1 - 9 of 9 Posts
Top