[QUICKNICK]

Can I just use a new straight razor or a sharp pair of scissors to cut it?
MSD sent me some extra and I need to make a plug for one of the compression fittings on the end of my 7531 box. Right now I just put in a thin piece of wire but want to make it right.

 

[Seattle_Mike]

I've cut them with a razor blade like what comes in the little gasket scrapers. As long as it's a nice straight, sharp cut, the cable will work fine.

 

[QUICKNICK]

I've cut them with a razor blade like what comes in the little gasket scrapers. As long as it's a nice straight, sharp cut, the cable will work fine.

Thanks Mike.
How hard is it to cut through?

 

[Seattle_Mike]

Easy

 

[QUICKNICK]

Used a new sharp one sided razor. Cut through like a frozen stick of butter. Nice clean cut. Worked out perfectly.