Yellow Bullet Forums banner
41 - 60 of 78 Posts

· Registered
Joined
·
2,227 Posts
Monty Mikho said:
Hey John, you should install a restrictor plate and race NPS... :smt005
Okay, it's getting late, today we whipped "Sinatra" out of the engine compartment, to check things over, took off the oil pan to check bearings and they're like new, leaked it down and they all leak 8-12% (cold), pulled a few valve springs off to check seat pressure.... they're down about 100 lbs, so it won't be long for some new ones from LSM, found a few rocker bearings that need a little touching up, all in all not too bad compared to previous seasons, although we only have about 10 hits on this thing....now it's off to Harrah's Casino for a little Blackjack.... Monty..shhhhh! don't tell Marie :-D
 

· Registered
Joined
·
1,456 Posts
I thought it was a 7.46 ?

Monty Mikho said:
He wont but I will... :-D

60' = 1.13
660 = 4.89 @ 146
1320 = 7.48 @ 185

Sorry Johnny but I have connections.. :-D And you thought I didn't...
Not to bring an old thread back to life, but I have heard some stories from reliable people.

I would love to see all the #s from that time slip.

By the way also rumored that Baio may run w/outlaws @ super chevy that means NO feeler gauge wheelies & @ 452 ci you must weigh 3204 !

Hope to see ya there - I'll be there Friday w/Bill Sharness
 

· Registered
Joined
·
1,456 Posts
I'm not trying to start trouble.

A very good friend was there all night so I was just asking to see the #s

By the way Monty you had to correct his wife on the NSCA board ?

Sorry it's just in my nature to ? certain things

Oh yea it also states in the outlaw rules that you can only run a solenoid w/max hole size of .125.

Do you mean the gilde he broke @ the Grove ?

Sorry I could not resist.
 
41 - 60 of 78 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top