Yellow Bullet Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
639 Posts
Discussion Starter · #1 ·
I am planning on changing to a double adjustable front coilover. My question is there are only three spring choices in what I need I think.. My current springs are 7 inches at ride height and the shocks are 10.5 at ride height. I am wanting to go with qa1 coil over springs that use the tci top spring bucket and bottom goes on the coil over shock.. but they only offer 250 and 300lb spring in 11 inch and 350lb in 10 inch springs... what on do you guys think would be better or best.. street car but Im trying to get it to work on the track.. weighs 1850 on the front
 

·
Registered
Joined
·
13,100 Posts
I made the mistake of not matching the spring to the weight and cutting two coils out to make it work
Don't do that
 

·
Registered
Joined
·
639 Posts
Discussion Starter · #3 ·
ok good to know not just to make it fit...
 

·
Registered
Joined
·
639 Posts
Discussion Starter · #5 ·
I honestly don't know. I know they are the standard from tci.. but I cut one coil off to lower it..
I am almost thinking that I might be better off just getting double adjustable shocks instead of coil overs
 

·
Registered
Joined
·
370 Posts
better check the front travel .most of those coil over kits dont have enough front travel to work right for what you want .
 

·
Registered
Joined
·
639 Posts
Discussion Starter · #7 ·
ok thanks..
 
1 - 7 of 7 Posts
Top