over the weekend i was at the track had a burnout get a little violent i was in high gear rolling and the car bit really hard. so hard i thought it wipped the driveshaft or something. I backed up and checked all gears everything seemed fine. but when i was on the return road i noticed a clunk in my low to high shift. this car is a fresh backhalf car new rearend tires etc. i checked all the 4link bars shocks, tires,center section,driveshaft i checked in inspection plug in the housing at the gear looks great just over 200 passes. i have looked everywhere i know of and im stumped i made a few passes after runs fine just the noise in the pits. has anyone ran into this? any ideas? Thank you for any help.