Yellow Bullet Forums banner

161 - 180 of 186 Posts

·
Busy being a cunt
Joined
·
28,953 Posts
Then you've never looked at the specs for the oil you use because that's how they rate the shit. Come on dude. It's not fucking neurosurgery. Don't try to put it off on someone else because you didn't think to look up what cSt means.
Even in Australia, that's how they rate viscosity. It isn't something Straub just made up lmao. It's been on every bottle of oil you've purchased for the last 2 decades, AT LEAST. If it wasn't on the actual bottle, all it takes is looking up oil viscosity to see that they use centistokes to measure viscosity.
Seems like you need some education about cst readings, anyway. Here's a little reading about International Standards Organization Viscosity Grade aka ISO VG and how cSt comes into play, what it is, how it's measured, etc...

https://www.machinerylubrication.com/Read/213/iso-viscosity-grades

Just because you didn't know what it was and never used it doesn't mean it's bullshit or snake oil. A measurement of viscosity can't be snake oil. Lmfao. Hell, I have a viscometer in my toolbox specifically to measure actual centistokes of whatever fluid I want to test. It's pretty odd to watch 10 weight oil flow just as quickly as a 5 weight oil because the 5 weight oil is at the high end of its range while the 10 weight was at the low end of its range.

Instead of being so confrontational and doing all you can to not accept this information as fact, be a little more open-minded. If you're not willing to learn, what's the point of even being on this earth?
You may even go as far as buying a Visage and learning how to use it so you understand what's being said instead of just denying it all because you're ignorant to it and refuse to even attempt to learn about it.

http://www.visgage.com


You know how they determine viscosity ratings and oil weights? They measure the centistoke rating. You can't have one without the other.
Enjoy the Kool-aid Justin :cool:
 

·
Busy being a cunt
Joined
·
28,953 Posts
Even in Australia, that's how they rate viscosity. It isn't something Straub just made up lmao. It's been on every bottle of oil you've purchased for the last 2 decades, AT LEAST. If it wasn't on the actual bottle, all it takes is looking up oil viscosity to see that they use centistokes to measure viscosity.
Utter fucking bullshit, and you admit it in the same paragraph :rolleyes:

Whatever you're on Justin, can I get some please :confused:

I don't want what you've been smoking though, I'm not into fellatio ;)
 

·
Registered
Joined
·
4,906 Posts
Midnight, nice you brought up the new Centistoke idea that has come out recently to confuse the masses at to what oil to run.

Here is a post by Chris HIMSELF from March of 2016 (less than 3 years ago) on RECOMMENDED oil

https://www.chevelles.com/forums/13-performance/864362-recommended-oil-hp-hyd-roller-lifters.html


"We have been working with several oil companies over the last 2 years to give the consumer an oil that functions the best with hyd roller lifters. Because Morels tolerances are so tight they need an oil that not only lubricates the engine but functions as a hydraulic oil.

After testing we will now recommend running Driven Oil for all hyd roller engines. Here is a note from Lake Speed Jr:

Chris,

Sorry so long to get back to you. It has been one of those days...

It was great chatting with you about hydraulic roller lifters in high-performance engines and how oil viscosity plays a significant role in the performance of the lifter. Many people seem to miss the fact that oil is a hydraulic fluid in these engines, and these lifters require the correct viscosity hydraulic fluid to function properly. And there are many factors that affect the viscosity of an oil once it's been in the engine for a while. All of this comes together to make the choice of oil a very important factor for a high-performance, hydraulic roller lifter engine.

We have done extensive testing with several engine builders and parts manufacturing companies to determine the correct viscosity and formulas to provide the best performance for hydraulic roller lifters.

Extensive engine testing in both race engines and street engines has confirmed that a 10W–40 viscosity grade provides better hydraulic lifter performance than 30 grades or 50 grade motor oils. As a result of this testing, here are the oils that we recommend for high-performance, hydraulic roller lifter engines.

Break-in: BR40 (part number 03706)
Hot Rod/Show Car: HR5 (part number 03806)
Street performance: HR6 (part number 03906)

Driven is not sold in Walmart but can be bought at local speed shops and some online vendors.

One unique additive the I really love about this oil is the use a chemical compound developed in WWII that prevents corrosion during long periods of storage. Most of our Hot Rods sit, so the added factor that the oil provide protection to your engine during long periods of storage is a huge plus."

Same spam post was also on Performance Boats but by the flunky:

https://www.performanceboats.com/gn7-dyno/318897-recommended-oil-hp-hyd-roller-lifters.html

And on v8Buick:

http://www.v8buick.com/index.php?threads/morel-lifter-oil-weight-and-type.309285/

I can read. maybe you can read better then me. I CAN NOT find the word or any reference to centistroke in this or any of the "Tennessee Twisters" or his flunky's "FATHEAD Foxwell" post up until recently. Nothing with regards to centistroke numbers till 2018 I have found. I wonder why that is?

I also have about 15 cases of Klotz oil I kept from my days as distributor of Klotz automotive branch in SW Ontario, and there is no mention of this centistroke number on there either??? But this oil is from a few years ago, so maybe that has changed and they run that number. I can NOT say for sure yet.
 

·
Registered
Joined
·
3,754 Posts
You may even go as far as buying a Visage and learning how to use it so you understand what's being said instead of just denying it all because you're ignorant to it and refuse to even attempt to learn about it.

http://www.visgage.com


You know how they determine viscosity ratings and oil weights? They measure the centistoke rating. You can't have one without the other.
Don't waste your time sir, they are not worth it.
 

·
Registered
Joined
·
11 Posts
Don't waste your time sir, they are not worth it.
coming from the big shot in the industry , that dose not even own a cam grinder . fact sir ....since Uratchko likes to protect you in the NA section . and delete posts . we will continue with this thread sir.....
 

·
Registered
Joined
·
4,906 Posts
coming from the big shot in the industry , that dose not even own a cam grinder . fact sir ....since Uratchko likes to protect you in the NA section . and delete posts . we will continue with this thread sir.....
I agree with this statement SIR! :cool:

LOL at least many many many people are starting to see thru this facade of yours.
 

·
Registered
Joined
·
3,754 Posts
coming from the big shot in the industry , that dose not even own a cam grinder . fact sir ....since Uratchko likes to protect you in the NA section . and delete posts . we will continue with this thread sir.....
Let me let you in on a little secret sir, Lunati, Crane, Cam Dynamics, General Kinetic, nor Wolvorine have cam grinders!!!!!!!!!!!!! It's the 21st Century!!!!!!!!
 

·
Registered
Joined
·
4,906 Posts
I find it quite amusing that you guys follow me around acting like children. I would hide behind screen names because if you were professionals that owned your own business and used your real names, no one would do business with you.
Don't flatter yourself, or twist your arm patting yourself on the back. No one is following you around. But confronting you when there is spam and when they see some injustices being done.

And FYI, my business did a tidy profit last year too..... both CABINETS and car business.

I think it's more like people here are finding out like they did on OSO. But YB doesn't ban people for this like they did to your 2 on OSO.
 

·
Registered
Joined
·
4,906 Posts
So just got a call from one of my customers. Seems this piece of SHIT Straub is going after him again saying I am him? This is a site he KNOWS I'm banned from since he had me banned.

https://www.chevelles.com/forums/13-performance/1081732-proper-finish-camshaft-lobe-2.html

Now look at what Snakeoil lying thief STRAUB says that his reason is:

"The statement above pretty much proves your John, NPSNova that has been banned from here 2X. Your continual issue of not being able to spell Morel correctly but referring to them as Moral."

So his whole premise is that I spell MOREL wrong? FUCKING REALLY. Well I'm not sure if Chris "THE TENNESSEE TWISTER" OF PEOPLE WORDS can not read, or is an outright lie. I believe it is the second, ANOTHER OUTRIGHT LIE. Here is the MorEl thread that he questioned here.

https://www.yellowbullet.com/forum/showthread.php?t=2563295

I believe at this time, I have around 13 posts. Pg 3 post #44 I mention MorEl twice. Pg 4 post #49 I again mention MorEl. Pg 5 post #74 again MorEl.

So this is why I get pissy with this clown of a snakeoil salesman and his sidekick Frodo. They go after MY customers without knowing what there REALLY talking about.

The above just proves that Mr Twist will spin anything he can to make the masses believe what he says it true, even if it's a blatant lie. Proof is above if anyone wants to follow the breadcrumbs.

P.S. as people know on this site, after 5 minutes you can't change your post, so also look at the timelines.

So Straub FUCK YOU you clown, lying snake oil salesman and a fraud..... :smt076
 

·
Registered
Joined
·
3,754 Posts
So just got a call from one of my customers. Seems this piece of SHIT Straub is going after him again saying I am him? This is a site he KNOWS I'm banned from since he had me banned.

https://www.chevelles.com/forums/13-performance/1081732-proper-finish-camshaft-lobe-2.html

Now look at what Snakeoil lying thief STRAUB says that his reason is:

"The statement above pretty much proves your John, NPSNova that has been banned from here 2X. Your continual issue of not being able to spell Morel correctly but referring to them as Moral."

So his whole premise is that I spell MOREL wrong? FUCKING REALLY. Well I'm not sure if Chris "THE TENNESSEE TWISTER" OF PEOPLE WORDS can not read, or is an outright lie. I believe it is the second, ANOTHER OUTRIGHT LIE. Here is the MorEl thread that he questioned here.

https://www.yellowbullet.com/forum/showthread.php?t=2563295

I believe at this time, I have around 13 posts. Pg 3 post #44 I mention MorEl twice. Pg 4 post #49 I again mention MorEl. Pg 5 post #74 again MorEl.

So this is why I get pissy with this clown of a snakeoil salesman and his sidekick Frodo. They go after MY customers without knowing what there REALLY talking about.

The above just proves that Mr Twist will spin anything he can to make the masses believe what he says it true, even if it's a blatant lie. Proof is above if anyone wants to follow the breadcrumbs.

P.S. as people know on this site, after 5 minutes you can't change your post, so also look at the timelines.

So Straub FUCK YOU you clown, lying snake oil salesman and a fraud..... :smt076
John its apparent why you hide behind multiple screen names and don't share your location or identity with anyone as the people that due do business with you for cabinets would be appalled at the way you handle yourself. Whether you do anything in this industry or not you are a disgrace to the all small business men.
 

·
Registered
Joined
·
4,906 Posts
John its apparent why you hide behind multiple screen names and don't share your location or identity with anyone as the people that due do business with you for cabinets would be appalled at the way you handle yourself. Whether you do anything in this industry or not you are a disgrace to the all small business men.
Look fuckhead. You again lie to the folks on Team Chevelle. I have only ever been on there as Ez Nova and nothing else. Yet again you don't know what your talking about. But Ricky texted me and seems that now even those over there are seing through you and have removed you slanderous posts.

GOOD FOR THEM.

You call me a disgrace, yet were on YOUR negative feedback with many many others who see through you nothing more then a thief and a slimmy snakeoil salesman. As for my other business ventures, you have no clue to wht your talking about.

You do nothing more then try to pray on those who don't know any better. Yet when they do, its to late. They spend way more then they originally were quoted and have an under achieving deal like Killer Pullers deal.

Sad really. But you must be stealing enough info from others by now to start making some educated guess. Fuckin Pillon
 

·
Registered
Joined
·
4,906 Posts
Hey salesman from STRAUB TECH. Why have you not gone back and replied to some of the direct questions o the last spam thread about the cam surface. Like what type of cam grinder you use? Your a custom cam guru... lol or the question about why just 1 wheel was mentioned? Or the pictures people asked about.

Your a fucking clown without the nose and big shoes you idiot
 

·
Registered
Joined
·
14,559 Posts
Look fuckhead. You again lie to the folks on Team Chevelle. I have only ever been on there as Ez Nova and nothing else. Yet again you don't know what your talking about. But Ricky texted me and seems that now even those over there are seing through you and have removed you slanderous posts.

GOOD FOR THEM.

You call me a disgrace, yet were on YOUR negative feedback with many many others who see through you nothing more then a thief and a slimmy snakeoil salesman. As for my other business ventures, you have no clue to wht your talking about.

You do nothing more then try to pray on those who don't know any better. Yet when they do, its to late. They spend way more then they originally were quoted and have an under achieving deal like Killer Pullers deal.

Sad really. But you must be stealing enough info from others by now to start making some educated guess. Fuckin Pillon
You really must have nothing better to do.
You sure have a brave, big, FOUL mouth behind that computer screen.
You are the biggest liar that ever crapped between two feet. That's been proven over and over again.
You don't own a business.
Your customers live in your imagination, not in reality.
Not a picture, not a video, not a dyno sheet of your own, ever.
No proof of who you say you are or what you claim to do except your constant bullshit. You are the poster child for name dropping.
You are what they call pathological. (look it up)
You're your daddy's little boy who lives off family money, doesn't work and pretends to be some hot shot racer when you probably can't even change a tire.
PLUS...you spend your time running around the internet all day, every day, just trying to stir up shit. Boy, what a way to spend a day. Your momma must be proud.
Anyone who believes your bullshit is a fool. Anyone who takes your advice is a fool. Anyone who listens to anything you have to say is a fool.
Talk about a Pillon.
 

·
Registered
Joined
·
14,559 Posts
Look fuckhead. You again lie to the folks on Team Chevelle. I have only ever been on there as Ez Nova and nothing else.
Oh BULLSHIT. Your IP address was confirmed and that's why you were tossed...again.
Just shut up John. Just go away. You've proven to be a liar even after our conversation on the phone but of course, your recollection of that phone call is completely different than mine.
YOU are the one with the agenda. You've admitted many times YOU HAVE AN AXE TO GRIND. You have reason to lie, besides the fact that you're just a liar.
Go away little boy. Little child. Little cry baby.
Chris is right...even if you are legitimate, your behavior on the internet is disgraceful. Good thing you can hide behind that screen.
 

·
Registered
Joined
·
4,906 Posts
Really this is sad Scott, really sad. I guess Straub doesn't pay benefits because if they did, you could get some help and meds, that you clearly do not take.

I have constantly asked when you spew your shit, POST PROOF OF ANY LIE??? Never happens. Oh and I'm constantly getting banned, NOPE I have only ever been banned from 1 site, well guess that's not 100% true because myself, Monty (former owner of this site), Jeff Monson (from the tech forum on this site) we all banned for a short time I believe from NMCA at some time, but were all allowed back. THAT IS A BIG REASON WHY THIS SITE WAS BORN.

Ah, I live off my daddy's money.. That's a good one. NOPE totally self funded. After my father passed last January, EVERYTHING went to mom. EVERYTHING is in moms name. NOTHING came to me. Yes my only brother passed in 2012. I came in to run the family business from my MACHINING BUSINESS THAT I OWN. We found it better LEGALLY to keep everything in parents name and bank account in case there is a problem in my marriage. It is protected from divorce law. And YES I will be well off when mom passes. I was offered 10k a month to retire in 2013. But I thought I was to young at the time.

No I have worked for what I have. And actually this car thing has COST me $$$ with the family. I have been offer ANY car I want if I get rid of the ones I have. I was off 6 figures for mine as well from my parents.

As far as owning the business. Your right, I DO NOT own my parents company. I run it on a day to day basis. I sign checks and make each and every decision. But ownership is with mom. By Canadian laws, it's beneficial that way for various reason. But my machining business I OWNED SOLELY. Actually I still do. My other business ventures are partnerships.

BUT how can an internet clown like you with Napoleon syndrome know anything about me who lives in another country 1000's of miles away??? STALKER I say. You must be good with the soap in the shower at the pen!!!!!

I have only ever used 1 name per site. YES customers have come in and used wifi. That doesn't mean there me clown. But like I stated, these guys are not one's to say much. And why is it I get a call that BOTH you and Chris had your "claims" post removed from that thread? Again another fable lie story you conjure up in that vast imagination of yours.

As far as my axe to grind, YES I CERTAINLY DO have one. Like you stated above, you claim my customers are me, you harass them and you think for 1 minute I would allow that.

Say what you want little whiny bitch. Seems there are alot more that are seeing through you 2 spamming clowns that trash people stuff and cost them 1000's then are upset with me. YES some want me to drop the drama, but look at the ever growing list of people that are calling you 2 clown out. Hell look at how long this is and the numbers on here. PLUS your piss poor attitudes that Morel (opps did I spell it right) is always right and never a problem, yet even guys who don't want to admit it are getting cautious about using Morel.

So this is a perfect spot to post some of my PROVEN lies that you speak of? Please do. Hell I posted on just above this where Chris said I spell Morel wrong, and that PROVES I'm my customer on the other site. YET when you look at the thread and spelling that is mentioned, no spelling mistakes. So either Chris can't read, also has an agenda, or OUTRIGHT LIED to try and discredit me.

This all came about with my axe when the constant badgering of yes MY CUSTOMERS and the constant trying to discredit me with the "he's not in the business, he just a cabinet guy who lives off his daddy's money". Spo you 2 fucking assholes started it. I have employees and therefore sometimes I have free time so I can keep this up for years.

Why were you 2 fuckwades banned on Offshoresonly.com? I was only ever banned from Team Chevelle. And I was told by the admins that you 2 wanted it done and Chris pays to be there. So they banned me.

Now go back to your dungeon FRODO. Your master will tug your chain when your needed again. So pass as an expert, but your an employee and only an employee so keep sticking up for your boss. Maybe you will get a bonus.

And if you did, maybe you can give some back to Killer Puller who's engine you guys screwed up and the reason this thread started...........................
 

·
Registered
Joined
·
14,559 Posts
I don't have to prove anything, John. My engines, my satisfied customers, my accomplishments and my reputation all stand very well on their own. The people who truly matter see through you like a blue sky. YOU'RE the one who can't prove a thing you say. Never have, never will. Your story changes like the weather and that's the problem with lying...you have to remember the lies! Calling me and Chris names and using your foul language is all you have and really shows what level you're on. If you think you have negatively affected my or Chris' business or reputation, you're delusional. You are insignificant other than being a pain in the ass. I'm glad to know that we're so far under your skin, though. Good and evil will always clash, and you, sir, are no good.
 

·
Registered
Joined
·
4,906 Posts
FRODO, I know your old with dementia and are quite delusional, but try to follow along.

Ok the lying??? You say I'm lying and making up so much, yet you can't provide any concrete proof that this has happened. YET I posted in here where Chris lied about me and a customer. That the spelling was infact correct unlike Chris's claim. That is proof. Also the proof that you 2 were lying as those post on TC have been removed by the admin. Again more proof. Yet there is no proof I lie.

I said I'm in the this car business. I show thread from years ago from this site and others as proof. Hell one thread on the other site from 3 years ago SPECIFICALLY asking if there was/is a market for these engine, "might get into the business of building and selling some BBc engines". Yet you claim I'm lying.

Where are the others that say I'm lying as well, it's just you and your boss. There are people here that do not like the drama and say I have an axe to grind, yet only you 2 have said anything about me lying.

Yet the list of those that call you 2 out for lying are:

ME
CNC Carl
Canada 1
Cynic
Canuc
BB Nova
WHT73
Rodent 4
Killer Puller
Star393
StrangeRanger
KwikSS

andd that's just off the top of my head.

I'm glad you can live off your REP, it's so good it got you BANNED on OSO. It got this thread Started by Killer Puller. You have constantly come under attacks from those mentioned above. And as they say, once you disagree with them, they turn it personal.

Look at some of the PM's I have received:

"Heh Chris sorry if you thought my question to Straub was an insult . I think it was relevant given the thread discussion and the way he was replying to an actual cam grinder , sounding off as if he was also . Straub is a saleman and you used to call him on it . Doesn't seem to be the case anymore and it doesn't look good on you or your forum ."

or

"You realize they would make another 120hp with a custom Straub cam and if Foxwell spilled his coffee on it...lol"

or

"Like I said, if it was "just" noise with us that would be 1 thing.
It took my engine builder to explain the legal AND money ramifications to HIM and even then he refused to even acknowledge that there could be an issue.

2 days later my son called him and he said "send all my stuff back including my cam"
We said "sure NO problem"

I guess it the advice Larry gave him sunk in."

or

"After what you just told me and what my brother told me yesterday, (he talked to Richard Iskenderian on Monday) I'm starting to have some regrets on my choice about going with Chris. It just pisses me off that there are guys out there doing this crap with other guys hard earned money. I might try and post my side of the story on TC but I got a feeling that the mods will close it or delete it. Thanks again John for your input, its been an eye opening experience for me reading these 2 threads."

and to an acquaintance

"nps, yes, thanks for the heads up. I'm on OSO as well so i have heard of some issues as well, lol. I will steer clear of those guys but thanks for taking the time! "

There are more but you can see for yourself. There is also the ones from YOUR CUSTOMERS from TC that contact me about the your ongoing oil pressure issues and dyno's. I had 4 of your customers contact me and asked me about it too as they said they were concerned as well.

Look, difference is, I'm not on here spamming for business and pushing parts or work. You guy always do and is note by many. We can disagree on things but you went to make it personal and FRODO is right, good and evil. I have a lot of thing in my past and that's my problems, SO WHAT. But I have tried to be a better personal, and usually I am. These 2 clowns wanted to bring out the evil, then so be it. EVIL it is, and will be till you guys stop your attacks on me.

FRODO, there it is. You say I lie and never back it up, I posted old posts on this and other site about being in the business. Just because we talked for 20 mins on the phone doesn't mean you get a life history on me.

Did YOU disclose you r401 K? NOPE.
Did you say if your married or not? NOPE
Did you say if your married to a man or woman? NOPE
Did you mention if you had kids? NOPE
Did you say if Chris pays benefits NOPE
Did you disclose other business ventures? NOPE

Yet when I do not disclose something, like being in the business, you say it's a lie? No FRODO I was playing/pumping you for info for our own dealings NORTH of the boarder.

Yes now you made it personal and harassing my customers, that got under my skin and could possibly effect my bottom line. Yet you and Chris seem to be so consumed with me, that even on other sites you think others are me when there clearly not to the point that that site REMOVED your post. I seem to be talking up so much space in your heads that I'm surprised Straub Tech hasn't sent me an invoice for rent!!!!!

I know of a least 4 jobs that these thread have steered away customers from you guys in since Chris posted the Morel noise thread back in December. And there seems to be more that regret doing business with you guys too, as noted in the PM's above. I stay small and local just for those I know. I have done 2 complete motor this year, got the short block done on the 3rd, doing my 498 at this time too. There are 3 more in the works. But by Chris's own admissions noted in a previous post, you guys only do "a couple of engines a year"? But I'm the lair???

POST SOME FACTS, BACK THEM UP WITH POST FROM THE NET, or as Judge Judy would say, IT'S AL HEARSAY..... i POSTED AND BACKED UP, YOUR TURN FRODO:-Daw
 
161 - 180 of 186 Posts
Top