Yellow Bullet Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
551 Posts
Similar issue here but it was the back bowl, Chris Uratchko told me some performance carbs metering blocks were not meant to have a power valve in the back so I put my block off back in and problem was resolved. Could be yours needs a power valve in the front the blockoff could not be seating all the way causing leaking.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top