Yellow Bullet Forums banner
1 - 2 of 2 Posts

·
Chinese buffet destroyer
Joined
·
2,134 Posts
Discussion Starter · #1 ·
i am wondering what kind of powerband i should expect with the cam i put in my motor, its a lunati solid flat tappit 595/595 with 252/262 duration cut on a 112 if i remember correctly. my buddy who helped me put the cam in when it was at his shop lost my cam card. if i remember correctly, it was from 3500-7500. does this sound right? its in a 10.1 compresion 402bbc. i plan on spinning the motor roughly 7000-7200 thru the traps. if you need any more info please let me know.
 

·
Banned
Joined
·
71,969 Posts
Much depends on how good your heads are.
More lift would be good but I'd say the rpm spread listed is pretty close given the duration #s
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top