Yellow Bullet Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
4,559 Posts
I ran this cam (Lunati 40121140: Drag Race Solid Roller Camshaft Small Block Chevy 262-400 Lift: .640" /.645" | JEGS) for 2 years many years ago in a 413sbc with early to mid 70's heavily modified cast iron Pro Stock heads. (They were some Jenkins heads I got ahold of outta Phoenix) This was around early 80's. Put 1.6 on the intake. 3200car, 4.88, T400 with 4200stall. Was a bit too much! On a well prepped track, stuck hard at the hit then pulled down.
The old Reed sprint car cam I had in it earlier pulled much better throughout the whole range. 108cl, 650lift exhaust 675lift Int. [email protected] int and exh. I put this Reed cam back in it and the slight pull down was gone.
 
1 - 12 of 12 Posts
Top