Yellow Bullet Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
I'm kinda stumped here so i hope someone can help me to understand.Here's the deal.

I was running Sunoco race fuel on Saturday and i ran out so i switched to C16 that i had.Ok this is in a BBC Blown and injected motor.If i understand this right the C16 is a slower burn fuel that is making it run and idle very rich.If i'm wrong please tell me.I plulled the barrel valve apart and no sign's of debree.So i thought my enderle fuel pump was eating it self up and getting weak but that was not the case.The motor just does not responed like it did.

Any help please.:confused:
 

· Registered
Joined
·
9,850 Posts
easiest way to see if theres a problem put other fuel back in,see if problem persists
 

· Registered
Joined
·
2,014 Posts
Sunoco Supreme is a bunch lighter than the C16 plus the Sunoco is about 7 to 8 octane points less. It will go fat on the C16. You'll have to decide which fuel you want to run and tune for it. The C16 will work great, you just have to tune for the C16.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top