Yellow Bullet Forums banner

1 - 20 of 36 Posts

·
Registered
Joined
·
1,162 Posts
Discussion Starter #1
Looking at building a 40 by 60 with living space nothing over the top. What is the estimated cost for the pad, land, electricity, water, materials and cost of having it built.
 

·
KEVIN CAPS LOCK
Joined
·
82,657 Posts
LOL....I THINK LOCATION WOULD BE PRETTY IMPORTANT
 

·
Registered
Joined
·
3,612 Posts

·
KEVIN CAPS LOCK
Joined
·
82,657 Posts
I CAN HAVE A WATER WELL DRILLED IN GEORGIA FOR 4K.......10K IN NORTHDAKOTA.....
SEPTIC IN GA...2500
SEPTIC NORTH DAKOTA....10K....LOL
 

·
FHRITP
Joined
·
50,874 Posts
Where is the land? My FIL had a 30x50 built 2 years ago, built from 4x4 square tubing. Was 5000 for the cement work, 15,000 for material and labor on the shop. No electrical, insulation, or plumbing.
 

·
Registered
Joined
·
3,612 Posts
You should think 40X80 and add urethane insulation sprayed in the whole shop.
 

·
Registered
Joined
·
1,444 Posts
40 x 60 is what I started with and it's not large enough... build bigger if you can. I should have made mine
at least 50 x 100 the first time...

mardyn
 

·
JACKASS
Joined
·
5,085 Posts
Looking at building a 40 by 60 with living space nothing over the top. What is the estimated cost for the pad, land, electricity, water, materials and cost of having it built.
7 years ago I had a 40x60 red iron built.
Concrete pad, shop kit, labor = $35,000
I done the elec, plumbing, and septic.
 
1 - 20 of 36 Posts
Top