Yellow Bullet Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
10,719 Posts
Discussion Starter #1 (Edited)
For 4.6" bore and bigger, ported, intake will flow 450+, exhaust ported and polished, should have a good valve job, 2.4" SS intake valve, stock 4bbl intake, items are "new" never ran. Will post the flow sheet before the roof was raised, no flow data on that. Make reasonable offer plus shipping if not picked up, located in Princeton WV. May be able to work out a deal on assembling the heads needed hardware and porting the intake. As is.

The "black" on the guide is from spray paint I used as a guide.
94329

94330

94331

94332

94333

94335

94337
94336

94338
 
1 - 8 of 8 Posts
Top