[paul c]

i am looking at a new intake for my 555 bbc w/ dart 355 pro1's to replace the brodix/sonny's unit. is it worth double the money for the edelbrock cnc super victor or just send one or get one from rfd? making changes to the cam and compression now so don't have exact specifics other than it will be an 11.5 to 1 pump gas motor that will be street/strip. current set up made 850+ at the flywheel w 12.3 to 1. 3500 lb w/ driver, th400. thanks in advance.

 

[555nova]

Dont waste your cash on the cnc victor.

 

[paul c]

thanks. i did a search and didn't find any info on it.

 

[TOPFUEL116]

PUT A SNIPER JR. ON IT...PICKED UP A TENTH, IN THE 1/8TH, WITH JUST AN INTAKE SWAP ON MY 540, DIDN'T TOUCH ANYTHING ELSE!!! SOLD THE EDELBROCK VICTOR!!!

 

[paul c]

on the profiler site they recommend the regular sniper for 540 + engines?

 

[TOPFUEL116]

I WENT TO STEVE SCHMIDT AND PICKED MINE UP. TOOK HIS ADVISE AND WENT WITH THE JR. ON MY 540 WITH DART PRO 1 345'S. JUST GOT ANOTHER ONE FROM HIM A FEW WEEKS AGO FOR MY SECOND COMBO. THIS TIME HE TOLD ME TO USE THE SNIPER 2. IT IS ON A 565 WITH MUSI EDELBROCK VICTOR CNC'S. SUPPOSED TO FLOW 420 AT 800 SO GUESS HE THOUGHT THE BIGGER ONE WAS NEEDED ON THAT SET UP. HE SAID SINCE MY CAR WAS 3200LBS HE WANTED THE JR. ON THE 540...SO THAT IS WHAT I DID.

 

[paul c]

do you have his web address? thanks.

 

[TOPFUEL116]

CALL HIM.... I BET WITH THE WEIGHT OF YOUR CAR HE WOULD SAY JR. ON YOUR COMBO.....

 

[TOPFUEL116]

http://www.steveschmidtracing.com/

IF STEVE IS NOT AVAILABLE TALK TO KENNY OR PHIL, I WENT AHEAD AND HAD HIM DO THE PORT MATCH WORK ON BOTH MINE !!!

 

[paul c]

thanks.

 

[another69camaro]

i am looking at a new intake for my 555 bbc w/ dart 355 pro1's to replace the brodix/sonny's unit. is it worth double the money for the edelbrock cnc super victor or just send one or get one from rfd? making changes to the cam and compression now so don't have exact specifics other than it will be an 11.5 to 1 pump gas motor that will be street/strip. current set up made 850+ at the flywheel w 12.3 to 1. 3500 lb w/ driver, th400. thanks in advance.

2916 is tall deck.your 555 is a tall deck?.

 

[paul c]

it's a tall deck.