Yellow Bullet Forums banner

bbc roller lifter wear ?

3904 Views 18 Replies 11 Participants Last post by  paul c
i am pulling the heads off of my 555 bbc and inspected the solid roller lifters. i noticed one pair came out slightly hard, had to work them out. then i noticed that there is scuffing on the side towards the cylinders. they all have it but all of the others moved nicely. all of the rollers were fine and the cam looks fine. didn't feel any scoring on the lifter bores either but will have to look a little deeper tomorrow. dart big m block, anyone seen anything like this? has about 800 street miles on it, hasn't been to the track yet. thanks in advance, paul c.
1 - 1 of 19 Posts
Your kidding yourself if you think they dont all do it. There is not a solid roller made for the street, 800 miles is only 3200 1/4 mile passes. If someone came to you and said I have 3200 passes on my anything you would think they are crazy. Not saying you cant because I do to but dont be supprised when you have issues out of everyones stuff.
1 - 1 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.