Yellow Bullet Forums banner

1 - 20 of 22 Posts

·
Registered
Joined
·
5,419 Posts
Discussion Starter #1 (Edited)
anyone use one looking at a used one just like to know some opinions it's a 1000cfm 4150
 

·
Registered
Joined
·
4,553 Posts
anyone use one looking at a used one just like to know some opinions it's a 1000cfm 4150
About the best carb on the market for bracket racing PERIOD!

If your looking to get it i would and then give Randy or Gordy a call at APD and give them the #'s on the side and your combo and they'll tell you where to set it at..;)
 

·
Registered
Joined
·
5,419 Posts
Discussion Starter #4
thats what i'm thinkin but it should be close guy had it on a 406 and thats what i got gettin the rest the specs from him
 

·
Registered
Joined
·
5,419 Posts
Discussion Starter #6
anyone think the 1000cfm to big for a 13-1 406 with fully ported 210afr's, sv intake, in a 2600lb camaro on footbrake
 

·
"Big Al" Sargent
Joined
·
7,472 Posts
468, 13:1, unported Dart 310s, Victor Jr, flat tappet solid lift camshaft (638/631 lift, 270/276 @ 050, 108 lc)
I ran a 6.24 at 110 in the eighth with a bad (1.41) sixty foot (it was on t & t night, unprepped track)
 

·
Registered
Joined
·
4,553 Posts
anyone think the 1000cfm to big for a 13-1 406 with fully ported 210afr's, sv intake, in a 2600lb camaro on footbrake
Nope not to big at all!!! as thats what i was running on my old 406 motor combo..And still am running the 1000cfm HP series carb APD built !!!!
 

·
A.K.A. MEAN Matt
Joined
·
3,581 Posts
I've been running an APD alky carb since 2005 and ran one of thier Gas carbs before that. Awesome stuff, you will not be disapointed.
 

·
Registered
Joined
·
5,419 Posts
Discussion Starter #14
well i bought it so guess we will see how it runs
 

·
Registered
Joined
·
5,419 Posts
Discussion Starter #15
just an update, you guys were right i love this carb car heats up easy, clean oil, and only changed the jets 2 steps for my ap. was at us13 and in 6 passes veried .005 on the foot. but it doesn't like alot of fuel pressure w/ the 150 n&s.
 

·
Registered
Joined
·
5,032 Posts
I am running two of John's gas dominator carbs and have never had a problem with either one. Good carbs.
 

·
Registered
Joined
·
3,068 Posts
Good carb, and good guy's. I have an APD on my dragster for the last 2 years. This year I stepped up to their lastest and greatest 1250 cfm, and the car picked up 2 tenths, and 5 mph. No BS!
 

·
Registered
Joined
·
5,419 Posts
Discussion Starter #20
i'm 8th in points outa 40 even after missing a week and having fuel pressure issues, been down 2 5-6 car twice and 2 semi's i love apd and i love alky, i would have had the bye into the final sat. if i hadn't screwwed it up by givin it back .008.
 
1 - 20 of 22 Posts
Top