Yellow Bullet Forums banner

Any experience with turning off a kit while turning on another?

1213 Views 12 Replies 11 Participants Last post by  dbromo
I have a 632 w/ big cheif heads and I was considering leaving on a small kit (spraybar) and with a relay turning off the spraybar and turning on my first fogger and activating my second fogger with my usual timer. Thanks for any advice!
1 - 1 of 13 Posts
OR...you could leave on one kit, turn it off, and on with the second kit, and then turn the first kit back on in conjunction with the second kit, to have a third stage, both kits. Then let the second fogger come in on the timer.....WOOOOOHHHHH

Id do it with 2 relays...1 4 wire, 1 5 wire,

Power the second kit 4 wire relay, with the 5 wire relay, drop the ground on the 5wire to turn off the first kit, there by turning the second kit on, then give the ground back to pick up the third stage.
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top