Yellow Bullet Forums banner
1 - 10 of 10 Posts

· Registered
Joined
·
681 Posts
Discussion Starter · #1 ·
The headers are finally done and are getting coated and thats it, everything is ready and should be running as soon as I get them back. cant wait, I havent raced all year, the way it looks I almost missed this year but I will get a few runs on it before winter, and mabey the street finals in bradenton in January. I have never gone this long without being ready since I started racing I cant wait.
 

· Registered
Joined
·
681 Posts
Discussion Starter · #4 ·
http://gallery.godragracing.com/gallery/pro04/pro7?full=1
this is one pic from the maple grove pro race last year. If you go on digitalracecraft.com and look at 2004 PRO event at the grove there are more pics. I will have some up soon of the new headers and other things I have changed
 

· Registered
Joined
·
1,442 Posts
I have seen your ride at PRO Beech Bend in 2004. Very quick. We are looking into keeping with the stock suspension and are currently running the stock rear and slide A Links. so far I have a best of 1.54 60ft with a single track. I will be changing to a 9" over the winter and can't deciede if i want to run the leafs or change to a ladder bar. $$$ is always a big concern so I'm hoping to be able to run the leaf springs
 

· Registered
Joined
·
681 Posts
Discussion Starter · #6 ·
I am still running leaf springs, just cheap 2'' lowering springs, with a set of modified south side bars off a camaro. Nothing trick or expensive about that. at 3280lbs my best 60ft was a 1.281. Also the front is completely stock with comp 3 way adustable shocks, stock springs control arms, everything.
 

· Registered
Joined
·
681 Posts
Discussion Starter · #8 ·
thanks for the compliment, I'm here pretty much all the time, like I said before feel free to just stop in, I always enjoy an excuse to stop work and talk about cars :lol:
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top