Yellow Bullet Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2,329 Posts
Discussion Starter #1
JUst picked up a set of small block ford afs for buddy's street car, had set of old trickflow's on them.... took am old -11 three quarter reach ngk plug and screwed into each, and the trick flow head the ground strap stuck into combustion chamber as normal... HOWEVER in the afr, the plug stayed recessed in tif whole about a quarter inch not putting the electrode into the chamber at all... doubled checked on their web site to doubled check and they do call for three quarter inch reach plug.... so I'm not really sure what to do or what we have going on... anyone ever have this happen? Suggestions?

THanks in advance
Eric
 
1 - 2 of 2 Posts
Top