Yellow Bullet Forums banner
1 - 13 of 13 Posts

·
Registered
Joined
·
3,117 Posts
Discussion Starter · #1 ·
Guy's would it best for me to post how much room i have for a air intercooler rather then ask how much hp can it flow

hp in mind is about 1250-1350 engine

Any help would be nice-

Thanks

Nick--
 

·
Registered
Joined
·
3,117 Posts
Discussion Starter · #4 ·
whats your question?
1- is it possible for a 1200-1300 hp engine to run a air to air intercooler and be efficent-

2-and if it is -some specs on lenth,height and thick ness-

Thanks

Nick--
 

·
SB2.2 + pt106
Joined
·
1,929 Posts
1- is it possible for a 1200-1300 hp engine to run a air to air intercooler and be efficent-

2-and if it is -some specs on lenth,height and thick ness-

Thanks

Nick--

yes its possible i have one on my car.

as far as efficient its good if you can get the air flowing and it does become not as effecient around 24 psi the air starts to get hot, obviously not as not with no ic

i can get you specs
 

·
SB2.2 + pt106
Joined
·
1,929 Posts

·
Registered
1967 Camaro | 5.3 LS | S485 Turbo
Joined
·
9,758 Posts
My friend Andy is "LastLS1" on www.LS1Tech.com and he's gone the fastest of any LSx A/A setup, [email protected]. He runs twin 76'd and a big A/A front mount. PM him. I think it's a Bell core but I don't remember. He's got to be making over a 1000 at the crank at his raceweight, car has leather and a 10 pt etc.
 

·
Registered
Joined
·
3,117 Posts
Discussion Starter · #12 ·
Turbo once again thanks for the quick reply and help on this topic

i have looked at spec sheet u gave me and it looks like your one is the go-

the other higher hp ones seem to thick for me to fit it in my vechile-

but i will measure it up tonight just in-case

thanks for the price also--

Thanks

Nick--
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top