[Blown Camaro]

Anyone download into AEMdata? For some reason the data in the program does NOT match what the gauge is displaying. RPM is off & Vac/Boost is off. AFR is dead on.

I played with the RPM setting in AEMconfig and got it close. I can't seem to fix the vac/boost. It is reading 50% low.

Example: AEMdata shows 4.5 inches of vacuum at idle but the gauge reads real time 9 inches.

:smt102

 

[Blown Camaro]

Anyone download into AEMdata? For some reason the data in the program does NOT match what the gauge is displaying. RPM is off & Vac/Boost is off. AFR is dead on.

I played with the RPM setting in AEMconfig and got it close. I can't seem to fix the vac/boost. It is reading 50% low.

Example: AEMdata shows 4.5 inches of vacuum at idle but the gauge reads real time 9 inches.

:smt102

Okay, I may have figured this out. The data log software reads -psi/+psi instead of the gauge which displays -inches/+psi? So I have to multiply vacuum x 2 but boost is correct?

Does this make sense to anyone?

 

[C. Ludwig]

Yes, if its reading in straight psig, that would be correct