Yellow Bullet Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4,438 Posts
Discussion Starter #1
What size fittings are used on the plates ? A buddy has a crossbar that he wants to run but he has to take a set of noids off to run Ultra. He has to order new lines to interlink the 2 nos and 2 fuel inlets in the crossbars and Im unsure if he needs 3an or 4an ? We will be taking the hard line off and replacing the 90 out of the noids with a Tee and supplying the plate with flexible braided line.This is the kit he has>http://www.summitracing.com/parts/wsn-309220/overview/
Thanks for any help.
 

·
Super Moderator
Joined
·
12,145 Posts
What size fittings are used on the plates ? A buddy has a crossbar that he wants to run but he has to take a set of noids off to run Ultra. He has to order new lines to interlink the 2 nos and 2 fuel inlets in the crossbars and Im unsure if he needs 3an or 4an ? We will be taking the hard line off and replacing the 90 out of the noids with a Tee and supplying the plate with flexible braided line.This is the kit he has>http://www.summitracing.com/parts/wsn-309220/overview/
Thanks for any help.
The jet fitting at the plate is a -3.. SJ
 

·
Registered
Joined
·
4,438 Posts
Discussion Starter #3
Thank u sir! I placed my plumbing and new line order with Katie this morning. ;)
 
1 - 3 of 3 Posts
Top