Yellow Bullet Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
144 Posts
depends on the ci and 871 on a 540 is to small.
on a 454 it's fine.
i got one, i know.
871 on a 540 with m2bb2xcnc head and it won't make enough boost , only 15 lbs 20% over driven.
head flow also makes a differance also.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top