Yellow Bullet Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
421 Posts
Discussion Starter · #1 ·
The MSD Installation Manual that comes with the 7AL3 says that the start retard removes 25* of timing when activated. I only run 30* total timing but need to retard about 10* out of that when I spin the motor over. When I researched this on the net there are several references to 7AL3 Start Retard Chips, is there a way to reduce the amount of timing that the 7AL3 takes out when the start retard function is activated?
 

·
T/S 368E
Joined
·
33,637 Posts
.

Disengage the start retard & use one of the switched ones with your 10* chip. Good luck.

.
 

·
T/S 368E
Joined
·
33,637 Posts
.

No biggie. I've been doing this a long time & I still do stupid stuff or miss something everyday.
Temporary brain farts happen, it would have came to you. That's what cool about being 2008.
We had no way to get instant info from thousands of people in my day. Good luck & be safe.


.
 
1 - 4 of 4 Posts
Top