[zackmandog]

help :smt066 bbc stock a arms 90/10 shocks all steel but glass hood 3450 weight ladder bar coil over backhalf should i put stock in it or what about morosa will have to cut them to get ride height any way thanks

 

[onefast68]

i used new stock springs..i asked for 69 350 camaro with a/c...works good on my car...i think i ended up at 1/2 coil cut.

 

[bruce69camaro]

I used Moog #6308, (six cylinder w/ automatic tranny) with 2 coils cut off.

 

[z289sec]

I used the Moroso trick fronts on mine, yes had to cut one coil off to get the ride height I wanted.

 

[.gearhead.]

I tried 3 sets of Morosos before I got one close to the proper ride height with mine. I had to cut 1-1/4 coils from mine and it sits nice, has 5.5" of travel, and launches just about right.

 

[Bensrat]

i used new stock springs..i asked for 69 350 camaro with a/c...works good on my car...i think i ended up at 1/2 coil cut.

Do you have any pics of your car to get a better idea of ride height?

 

[Bensrat]

Are Santhuff springs to spongy(progressive) for the street or are they alot more tame then the Moroso? How do u like them compared to Moog? I am already running 2" drop spindles so i will need to be careful that it doesnt give me much of a drop.

 

[Bensrat]

TTT

 

[onefast68]

 

[onefast68]

 

[onefast68]

 

[Bensrat]

Thanks for posting the pics, i can see buying springs and getting it right the first time will be a challenge with the 2" drop spindles I have on the car. I have only had my car for little less then 2years so i have no idea what springs are on the car now, but it sits nice with the 2" spindles. I just wanted to put a fresher performance spring on the car now that i already did Global west A arms but dont have room for more drop.

 

[tricktom1]

Ttt