Yellow Bullet Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
8,892 Posts
Discussion Starter #1
I am putting together a car for a customer, street car will see a bit of track time. It has stock height spindles.
I was looking at TRW springs the 6 cly springs are 220 lbs and the 8 cly are 314lbs with the same or close to the same free height. I am looking to lower the car but am not sure if the 6c cly spring will be able to hold the front up . What do you guys suggest ?
 

·
Registered
Joined
·
4,514 Posts
Why not Santhuffs? They seem to be the hot ticket lately.
 

·
SOFA KING WHAT?
Joined
·
43,675 Posts
If it's a SB car use the 6 cylinder springs, they will do what you need them to do as far as ride height and stored energy.
 

·
Registered
Joined
·
8,892 Posts
Discussion Starter #7
If it's a SB car use the 6 cylinder springs, they will do what you need them to do as far as ride height and stored energy.
thats what im asking , ifd i use the 6cylinder spring will it hold the car up enough ? Its a alum head sbc, p/s, alum radiator,full int
 

·
Registered
Joined
·
1,447 Posts
thats what im asking , ifd i use the 6cylinder spring will it hold the car up enough ? Its a alum head sbc, p/s, alum radiator,full int
The 6 cylinder springs will hold it up just fine.
 
1 - 8 of 8 Posts
Top