Yellow Bullet Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
519 Posts
Discussion Starter · #1 · (Edited)
I have 6 used Nascar Bowtie 1184A blocks.All of them have SB2.2 lifter pattern.Lifter bores are .937 keyway bushings.These 1184A blocks can be ran at 4.200 bore.The bores on these blocks vary but the one in picture is 4.190
All of them have 55mm cam bearings.5 of them have 2.017 mains & 1 is 2.300 Three of them have Nickasil liners.
They must be picked up in Knoxville,Tenn. Not seperating. Take all 6.I need the space in the shop.
All six--$3,000.00 cash.
We also have several short stroke cranks that fit these blocks that you can get a heck of a deal on if you buy everything.
Email: [email protected]
Phone: 865-567-6943
IMG_20210715_142938.jpg
IMG_20210715_142502.jpg
 

·
Registered
Joined
·
519 Posts
Discussion Starter · #3 ·
If you look at the pictures closely,you will see the rear main caps have no provision for bolting on an internal pump.
 
1 - 4 of 4 Posts
Top