Yellow Bullet Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
Just wondering a stock block 6.0 from a 3/4 ton truck cast block what hp rating is it good to? also how about the crank? Ive heard 800rwhp? thanks
 

·
Registered
Joined
·
5,292 Posts
Yeah and don't try 9000rpm on the stock bottom, it will break a rod bolt before it gets there!

Now 8000rpm especially with some ARPs is money
 

·
Registered
Joined
·
9,666 Posts
Tirefryins10 makes a tick over 1100 rwhp on a stock unfilled lq4 block and crank. Stock 317 head castings as well. Twin 76mm iirc turbo combo at 20 psi. Stock computer, harness, and coils too.
 

·
Registered
Joined
·
756 Posts
Tirefryins10 makes a tick over 1100 rwhp on a stock unfilled lq4 block and crank. Stock 317 head castings as well. Twin 76mm iirc turbo combo at 20 psi. Stock computer, harness, and coils too.
damn i wana do the same thing? but 370" motor same turbos and boost though?
 

·
Registered
Joined
·
127 Posts
will hit my 6.0 with a 91,5mm turbo, arp head and rodbolts and some mls gaskets, before I go all the way with diffferent rods, pistons, crank, heads etc.. Will be interesting.. :smt073
 

·
Registered
Joined
·
5,292 Posts
They seem to take a hell of a beating.... cylinder walls are really thick
 
1 - 8 of 8 Posts
Top