Yellow Bullet Forums banner

1 - 16 of 16 Posts

·
Registered
Joined
·
111 Posts
Discussion Starter #1
Im putting together a 496 bbc, with a f3 123mm gear driven procharger... I have everything for the motor except a fuel system... Planning on running big stuff 3 fuel injection with either gas or alky, And was wondering what kinda stuff i would need to get it running well on alky? I have a 3000 hp intercooler, brand new, but don really want to cut the car up to use the intercooler on gas... Thats why im leaning more towards running it on alcohol without an intercooler(straight from the blower into the motor with fuel injection) Just wondering what would be best and what kinda et's i could expect?
 

·
Registered
Joined
·
111 Posts
Discussion Starter #6
sounds like i should just stick with gas and the direction i was going, what kinda pump and injectors would be suitable for a c16 setup?
 

·
Registered
Joined
·
165 Posts
Not sure about big stuff but with XFI 500 moran and 160"s no problem with idle on alky. Injectors not staged 80psi base pressure engine idles about 5.5 afr 1150-1200 rpm and will go leaner. we use a 20 gal pump and engine uses about 16.5 gpm and about 85% duty cycle 42-45 lbs boost.
 

·
Registered
Joined
·
111 Posts
Discussion Starter #9
I guess non-intercooled alcohol carb would be a bad idea? I already have a 3000 hp intercooler i should prolly jus use it and run fuel injection with gas.....
 

·
Registered
Joined
·
111 Posts
Discussion Starter #11
I think im gonna go wit a set of 212 injectors, 95mm throttle body, bs3, with c16? sound good? Havent decided on a pump yet?????
 

·
Registered
Joined
·
111 Posts
Discussion Starter #15
dart big m block, lunati pro 4.25 crank, groden alum rods, diamond 9half1 pistons, morris .748 lift cam, brodix bb2plus cnc heads edelbrock manifold with 212 injectors elbow 95mm throttle body,bs3, 3000hp intercooler, powerglide, 3400lb 66 nova on 33 10.5 tires c16 fuel
 

·
Registered
Joined
·
1,751 Posts
Ive seen and worked on a few combo's like this, but I dont know anything about an Edelbrock intake, specs of your cam (dur and lobe sep) or how much rpm and boost your going to make..


Seen a 18psi combo non intercooled gas deal make 1400hp and a max out effort 572 (memory 27psi?) make 2100.

At 3400ibs, poor the coals to it and run 7's.
 
1 - 16 of 16 Posts
Top