Yellow Bullet Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
136 Posts
Discussion Starter #1
What type of power have you made on a STOCK BLOCK Windsor?
Have one that's a 408W with 4130 crank and rods, Victor Jr. heads etc.


What type of power are people making with a Stock plate form 5.3/6.0L set ups?
Would have better rings and head studs.


This is a budget type build, will be a large frame 94 mm turbo.

Looking for options of the best bang for the dollar!
 

·
Registered
Joined
·
1,832 Posts
What type of power have you made on a STOCK BLOCK Windsor?
Have one that's a 408W with 4130 crank and rods, Victor Jr. heads etc.


What type of power are people making with a Stock plate form 5.3/6.0L set ups?
Would have better rings and head studs.


This is a budget type build, will be a large frame 94 mm turbo.

Looking for options of the best bang for the dollar!
I would think the 5.3 and 6.0 would handle more power over the 351w.

I have seen some 351w handle 800-900 what year block? Is the 408
 

·
Registered
Joined
·
2,680 Posts
i had the same setup cept a 101mm. made 840rwhp on pumpgas. never did race fuel. LS motor is well over 1k rwhp on Q16
 
1 - 5 of 5 Posts
Top