[rustyb]

anybody have a good starting point for a i c for a 1500 hp dragster

 

[shannon79malibu]

I would start about at 125 in about 6 ins in the ground

 

[rustyb]

thanks,we aqre out farther than that and at about six inches.this is a blown deal and that seemed too long to me.

 

[SG60IMPALA]

Who's chassis is it. You might try calling them. I can't remember off hand which holes my customers car is in but it is also a blown SBC.

 

[Bammer540]

How long is the car? On our 245" cars we go out 140- 145 and up 3", seems to work really well on a 1480hp car.

 

[rustyb]

the chassis is a m&m,it is set how they want it.we are haveing reation time problems,and tire shake.if we get wheel speed up to 1900 it seems to do ok.but to do that we had to leave pretty hard 4000 rpm.last night found input shaft twisted.that 145 out is what i was thinking about and then lowering launch rpm.right now i cant remember the measurements but is past 145