Yellow Bullet Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
972 Posts
Discussion Starter #1
I have moroso drag launch front springs and lakewood 90/10 front struts. In the rear I have spohn torque arm, lca's, pro drag rear sway bar. The springs in the back are stock and I run the lakewood 50/50 shocks in the rear.

This is my first year running radials and I am wondering if there is anything I should tweak or change? The rear suspension is all heim ends and the pinion angle is -2 right now.
 

·
Registered
Joined
·
532 Posts
i think the sway bar will work for u ! i had -3 pinion angle and the spohn racing sway bar , i did use the qa-1 12 way rear shocks and i ran a 740 hp 540 . on motor it would 1.32 short and with a 250 shot i got 1.28 shorts and 8.90 at 150 mph . car weighed 3600 with my pork ass !
 
1 - 6 of 6 Posts
Top