[deputydog]

I thought this was on here before but the search turned up nothing. Whats the actual 295/65 M/T DR section width on a 10" rim. I have a set of 29.5/10.5 slicks on 8" rims for mock up and the section is 12.5. Was hoping to put these on 10" rims along with the DR's but anything over 13 1/4" of section wont work

 

[KylePBZ]

The 295's on a 10" are 12.5" section.

 

[65 Camino]

With 25 lbs air in them, I measured mine at 12-7/8 inches wide.

R/ Dave

 

[deputydog]

thanks guys, looks like the 295's will work on a 10" rim but I dont think the 29.5's will fit on a 10" if the section grows .400 for every 1" of rim width that would put me at 13.3" might me to close. Might have to go with a 9" rim to make my section 12.9".

 

[Boyzbad]

With 25 lbs air in them, I measured mine at 12-7/8 inches wide.

R/ Dave

X2 and the 3062S's are 13.25"

 

[sr71]

for comparison to the mt, my 295 hoosiers measured 12.25" on a 8.5" rim and 12.75" on a 10" rim.

 

[fstr-thanu]

Anybody but the 295 on a 12in rim?

 

[heavychevy]

Mine measured 13.1".

 

[Jesse Lambert]

keep the 295's on 10's.