Yellow Bullet Forums banner

2008 GMC Sierra transmission control module

4361 Views 7 Replies 3 Participants Last post by  bobr
Does anyone know where this is located? I thought it was behind the ECM and changed whatever that is but the no shift/no speedometer issue is still with me. I also changed the VSS. Any ideas?
1 - 8 of 8 Posts
inside, part of the valve body
its mounted on the fan shroud on my 09

That's likely the one that I changed on mine...under the fuse/relay box next to the ecm.
4 is next to ecm, 6 speed inside
4 is next to ecm, 6 speed inside

This one is a 4. 4.8 1500.
Tell me what it is doing and do you have any codes?
Tell me what it is doing and do you have any codes?

I figured it out. The TCM was bad. I changed it but still had problems. I was told the new one was good to go right out of the box. It wasn't. Limped the truck up to my local Chevy dealer and they reflashed the new TCM. All is well now. Thanks for the replies.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top