Yellow Bullet Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
2,416 Posts
Discussion Starter #1
I know this might not be the appropriate area for this question but I thought it would get the most hits in here! :D

I am going to be running the OSCA S/E class this upcoming season and I am going to have to bolt a set of these small 10.5W tires on my car for the first time! :p

I am wondering what width Weld Draglite rim I should buy to run a 29.5/10.5W on. I currently have 14" rims for my 32/14.5Ws and am thinking of purchasing a set of 12" wide rims for the 10.5s. I want to use the width to get the most contact patch out of the tire and keep them lookin as wide as possible.

What width rims do you guys run with your 10.5Ws?
 

·
Registered
Joined
·
635 Posts
run a 10' rim with that tire
 

·
Super Moderator
Joined
·
9,240 Posts
Try them on the 14" rims. The wider rim will keep more rubber on the ground. I used to run that same tire on a 12" rim.
 

·
Registered
Joined
·
211 Posts
It would be safe to say that 12 inch rims are the best to run. M/T 29.5x10.5w are the favorite here also, I saw the pole taken and M/T won by a long shot.. :-D
 

·
Registered
Joined
·
211 Posts
Hey shawn those go-kart tires and rims are going to be 12lb lighter look at all the wt. saved, you should try it to. ha ha :-D
 
1 - 8 of 8 Posts
Top