[cp463]

Does anyone know where I can find one of these adapters? I've been unable to find this exact combo of an adapter. I have an extra 1/2-20 bung on my moroso oil pan, and need to adapt to 1/4npt to install a oil temp sensor for datalogging purposes.

 

[69427]

These?

http://www.anhosefittings.com/an-or...MI7pWk8tyR4wIVho3ICh1q9grBEAQYBCABEgIOPPD_BwE

 

[ironpony]

so, if it is 1/2-20 you will need a shoulder with a gasket to seal correct ? NPT male or female ?

just like what was posted above me LOL. treed

 

[juiced coupe 78]

https://www.summitracing.com/parts/sum-g1380/overview/

Be careful with them, they are thin.

 

[cp463]

https://www.summitracing.com/parts/sum-g1380/overview/

Be careful with them, they are thin.

Perfect. This looks like I could remove the jam nut portion, and thread the 1/2-20 male end into my pan (already has a 1/2-20 female bung welded in) and then screw in my 1/8npt temp sensor.

The fitting itself is thin? Thanks for the help guys.

 

[juiced coupe 78]

The fitting itself is thin?

Yes. If you read the reviews on all of those type fittings, many have broken them by over tightening them.

 

[cp463]

Yes. If you read the reviews on all of those type fittings, many have broken them by over tightening them.

Excellent. Thanks fellas!

 

[Tripdeuces]

What's wrong with drilling and tapping your original plug?