Yellow Bullet Forums banner
Showcase cover image for torana 4 doore sedan

General Information

LH Torana
SL/R 253CI V8 m21 4 speed manual Black on black interior
I have owmed car for ten years purchased as a roller.
previous owner had it of the road for 8 year's.
1974 Holden LH Torana (orange)


Ozzie GMH 304 ci V8 stroked too 383 ci. Come 4 bolt mains,1/2inch head bolts , steel auscrank 3.750 nitrated crank ,mahle 2618 26cc 4,030 pistons ,oliver rods ,come 600 series heads flow 628hp,jesel 1.7 shaft rockers,jet engineering 3/8 push rods-0.120 wall with 0.040 restrictores,cometics head gaskets,id 2000 injectors,Torque power propaw manifold,wilson 1 inch burst spacer,aaron's sheet metal elbow with devider,Ls3 DBW throttle ,camtech solid street roller [email protected] 632lift -114,crane ultra pro solid lifters,daileys external oil pump driving a KSE sprint car powersteering pump, asr 8ltr sump with -12 external pick up and turbo return,
built by competition engnes.
76mm mr billet turbo T4 1.55 twin scroll exhuast housing,
twin 45mm turbosmart wastgates,
Burn's 321 stainless double slip colector's,
Adrad water to air cooler,
motec adl2 dash ,m800 motec,msd crank trigger,lq9 coil packs,mechman 240 amp alternator, jones racing crank drive,
10-1/2 inch dominator stall mech diode,
powerglide ATI 1.80 straight cut gear set, TCI alloy gerota pump, fully rollerised, TCI promod clutch hub, billit reverse piston, TCI vasco turbo input, ATI supercase withfull ATI Titanium bolt kit, hipster alloy valve body with brake, Sonnix billit twin ring servo and cover.
Built by CE Transmission's
Stretched rear wheel arches for 60 serie's tyre's,
Fibreglass hood with 4 inch cowl induction.
Bullet billit hood hinges.
custom fire wall.
Front; frame rail's have been double skinned for custom polyurethane mounted Mid and front engine plate's.
Castlemain rod shop crossmember with conventional mount.
Rear; Chassis connector's,Mini tubbed.
Wilwood master cylinder withb hydroboost
Front and rear disc from holden statesmaqn, Electric handbrake.
Front; Tubular cross member and A arm's with double adjustable QA1 coil overs built by Mcdonald Brother's with subaru power steer rack.
Rear; 9 inch, Romac full floater rear ,31 spline hytuff axle's , strange pro iron case, detroit locker ,motive 3.5 gear's,CR/MO adjustable upper and lower trailing arm's,Strange adjustable coilover's.
Wheel and Tire
weld prostar's
front's 4x15 with 175x15 firestone
rear's 10x15 x 4-1/2 back space
with 275x60x15 MT drag radial
It could take a 12x15 with 5-1/2 back space rim with a 295x60x15 MT radial tyre.



There are no comments to display.