|06-24-2019, 11:20 PM||#1|
Join Date: Nov 2013
Location: Elgin Il.
traction issues still relevant
OK so I have made 7 passes with the new engine combo and haven't made one clean pass. First 4 passes where all made with a sever flat spot off the line best 60 ft. was a 1.67
I fixed the carb issues and now I got traction issues. Im sure this time around its my tires. I have nitto drag radials BUT.... I wanna say track prep last weekend was not in my favor.
Current suspension is tubular uppers and lowers in the front with .90 tall upper ball joints and 80/20 afcos with 66 6cyl. A body front springs. IN the rear I have QA1 single adjustable and had them set to 5 clicks from 0 with 442 rear springs , SSM lift bars , adjustable uppers with pinion angle being -3 degrees.
In the first video its a bit more sever as I launched at about 1700 RPM It hit the tires much harder . In the 2nd video I launched at about 2500 RPM and spun but not nearly as bad. IM leaning towards tires and im having my hoosiers mounted this week. Any advice is appreciated.
This is a video of my best pass the first outing it was a 12.10 with a 1.67 60 ft. and it had a flat spot off the line and I short shifted the 1-2 shift really bad.
Last edited by coppercutlass; 06-24-2019 at 11:22 PM.