Monte Smith bs plate jet spreads? - Yellow Bullet Forums
;

Go Back   Yellow Bullet Forums > Technical Section > Nitrous - Induction Solutions

Nitrous - Induction Solutions

Reply
 
Thread Tools Display Modes
Old 09-17-2019, 05:37 PM   #1
the mex
Senior Member
Smoked Another SBC
 
the mex's Avatar
 
Join Date: May 2008
Location: land of the sooners!!
Posts: 10,481
Default Monte Smith bs plate jet spreads?

Does anyone know what spreads to start with on a Monte Smith bigshot plate kit with his ported bottom dump trashcan solenoid? Looking for 200ish and 250ish jet spreads for it...
__________________

the mex is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 09-18-2019, 02:27 AM   #2
Foggerman
Junior Member
Spooled up
 
Foggerman's Avatar
 
Join Date: Jan 2010
Location: N. MS
Posts: 234
Default Re: Monte Smith bs plate jet spreads?

I’m not familiar with the trash can noids, and i know they will pass more nitrous through the jet than the smaller noid. My big shot plate says 85N jet is 250. Hope this helps.
__________________
SBNOS275RTCTTFMF

"As I lay rubber down to street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
Foggerman is offline   Reply With Quote
Old 09-18-2019, 11:01 AM   #3
68FormalGT
Senior Member
Smoked another BBC
 
Join Date: Oct 2013
Location: Pueblo West, CO
Posts: 3,743
Default Re: Monte Smith bs plate jet spreads?

You could send it in to IS and Steve would flow test it.
__________________
Quote:
Originally Posted by Lem E Evans View Post
I guess a guy could walk down the street and see more fat ugly girls than pretty girls.....should you go for the homely bitches because there are more of them?

Quote:
Originally Posted by Randy Wilson View Post
If you donít change anything from last weekend, youíll run exactly like you did last weekend.
68FormalGT is offline   Reply With Quote
Old 09-18-2019, 11:08 AM   #4
cobra13
Senior Member
Smoked another BBC
 
cobra13's Avatar
 
Join Date: Oct 2008
Location: oklahoma
Posts: 2,072
Default Re: Monte Smith bs plate jet spreads?

you know who to call
cobra13 is offline   Reply With Quote
Old 09-18-2019, 01:18 PM   #5
Induction-Solutions
Moderator
Smoked Another SBC
 
Induction-Solutions's Avatar
 
Join Date: Sep 2007
Location: Florida
Posts: 12,026
Default Re: Monte Smith bs plate jet spreads?

If you don't have the tune up info he provided and do not want to get it flowed here's some general info that might helps..

https://inductionsolutions.com/tech-info/
__________________
Steve Johnson
www.InductionSolutions.com
http://www.facebook.com/#!/pages/Ind...06171102739096
815-341-8853 Cell
352-593-5900 Parts/Shop
[email protected]
Induction-Solutions is offline   Reply With Quote
Old 09-18-2019, 06:31 PM   #6
the mex
Senior Member
Smoked Another SBC
 
the mex's Avatar
 
Join Date: May 2008
Location: land of the sooners!!
Posts: 10,481
Default Re: Monte Smith bs plate jet spreads?

Quote:
Originally Posted by cobra13 View Post
you know who to call
I really donít, everyone I can think of that has run these kits canít remember what the jet spreads are
__________________

the mex is offline   Reply With Quote
Old 09-18-2019, 06:32 PM   #7
the mex
Senior Member
Smoked Another SBC
 
the mex's Avatar
 
Join Date: May 2008
Location: land of the sooners!!
Posts: 10,481
Default Re: Monte Smith bs plate jet spreads?

Quote:
Originally Posted by Induction-Solutions View Post
If you don't have the tune up info he provided and do not want to get it flowed here's some general info that might helps..

https://inductionsolutions.com/tech-info/
I didnít think about having you flow it. That is what I will do.
__________________

the mex is offline   Reply With Quote
Old 09-19-2019, 10:32 AM   #8
cobra13
Senior Member
Smoked another BBC
 
cobra13's Avatar
 
Join Date: Oct 2008
Location: oklahoma
Posts: 2,072
Default Re: Monte Smith bs plate jet spreads?

Quote:
Originally Posted by the mex View Post
I really donít, everyone I can think of that has run these kits canít remember what the jet spreads are

Chief or Shawn still prob have data from the 55, if not I am pretty sure I have it in my old laptop from CJ's car or in my Monte Smith book.
cobra13 is offline   Reply With Quote
Old 09-19-2019, 10:34 PM   #9
the mex
Senior Member
Smoked Another SBC
 
the mex's Avatar
 
Join Date: May 2008
Location: land of the sooners!!
Posts: 10,481
Default Re: Monte Smith bs plate jet spreads?

Quote:
Originally Posted by cobra13 View Post
Chief or Shawn still prob have data from the 55, if not I am pretty sure I have it in my old laptop from CJ's car or in my Monte Smith book.
This is the kit off of Shawnís 55. He said he just ran the no jet set up and Chief canít remember what the fuel psi and jet spread was. I know when he tuned the same kit on my car it was a 78 jet squared with 4.5psi fuel pressure and 24 degrees timing on c16 but it was on the ragged edge I remember.
__________________

the mex is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 09-23-2019, 03:56 PM   #10
Induction-Solutions
Moderator
Smoked Another SBC
 
Induction-Solutions's Avatar
 
Join Date: Sep 2007
Location: Florida
Posts: 12,026
Default Re: Monte Smith bs plate jet spreads?

Quote:
Originally Posted by the mex View Post
This is the kit off of Shawnís 55. He said he just ran the no jet set up and Chief canít remember what the fuel psi and jet spread was. I know when he tuned the same kit on my car it was a 78 jet squared with 4.5psi fuel pressure and 24 degrees timing on c16 but it was on the ragged edge I remember.
Squared jetting is a long time thing of the past. It also leave a lot of power on the table..
__________________
Steve Johnson
www.InductionSolutions.com
http://www.facebook.com/#!/pages/Ind...06171102739096
815-341-8853 Cell
352-593-5900 Parts/Shop
[email protected]
Induction-Solutions is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -4. The time now is 04:52 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 0%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Yellow Bullet LLC
 

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.